Posts : 810 Join date : 2011-07-29 Location : Sacramento CA
Subject: Early Bay Window Slider Door Seal Install Fri Dec 21, 2012 9:02 pm
Today I was looking at my Busdepot slider door seal. I went out and looked at my bus's old seal and figured out how the new one goes. I decided to put it in pics. Hope this helps others.
The over all seal. Looking at it as if you were looking at it in the bus.
All the pics are is if you are looking at it installed in the bus. So what you see is the 'front' of the seal.
Here is what the back of the seal looks like. It is the part that would be pushed up against the metal groove of the bus.
back of the corner. (again, this part is put into the groove of the bus agains the metal.
Here is the top right corner of my bus.
Here is where that flat piece goes in pic number 2.
Hope this helps anybody wanting to put in a new seal.